Candela vs Lux vs Lumens: Everything You Need to Know

stripsledlighting

Table of Contents

 

When buying an LED bulb, LED strip, spotlight, flashlight, or commercial lighting fixture, you will often see specifications such as 800 lumens, 2,000 candela, or 500 lux.

Although all three units relate to visible light, they do not measure the same thing:

  • Lumens measure the total amount of visible light emitted by a source.
  • Candela measures how strongly the light is emitted in a particular direction.
  • Lux measures how much light reaches a surface.

Understanding the difference between candela, lux, and lumens is essential when designing residential, commercial, architectural, automotive, stage, or industrial lighting.

A lamp with a high lumen output is not automatically bright at a distant surface. A high-candela spotlight may produce an intense beam while emitting fewer total lumens than a wide-angle floodlight. Lux, meanwhile, changes depending on the distance, beam angle, installation height, surface orientation, and surrounding environment.

This guide explains candela vs lux vs lumens, how these units are connected, how to convert between them, and which measurement you should use when selecting LED lighting.

Candela vs Lux vs Lumens: Quick Comparison

MeasurementSymbolWhat It MeasuresSimple MeaningCommon Applications
LumenslmLuminous fluxTotal visible light emittedLED bulbs, LED strips, ceiling lights, fixtures
CandelacdLuminous intensityLight strength in one directionSpotlights, flashlights, headlights, signal lights
LuxlxIlluminanceLight arriving on a surfaceOffices, desks, floors, walls, work areas
Luminancecd/m²Light emitted or reflected by a visible surfaceHow bright a surface appears from a directionDisplays, signs, screens and illuminated surfaces
WattsWElectrical powerEnergy consumed by the lightPower supplies and energy calculations

The simplest way to remember the difference is:

Lumens come from the light source, candela describes the beam direction, and lux is measured at the illuminated surface.

What Is Photometry?

Photometry is the measurement of visible light based on the sensitivity of the human visual system.

It differs from radiometry, which measures electromagnetic radiation as physical energy without limiting the measurement to how the human eye responds. Photometric measurements weight different wavelengths according to a standardized model of human visual sensitivity.

This is why two light sources using the same electrical power do not necessarily produce the same number of lumens. Their spectral output and efficiency can be different.

The most common photometric quantities are:

  • Luminous flux, measured in lumens
  • Luminous intensity, measured in candela
  • Illuminance, measured in lux
  • Luminance, measured in candela per square meter

These measurements describe different stages in the path of light—from the source, through a particular direction, to the receiving surface.

What Are Lumens?

A lumen, abbreviated as lm, is the unit used to measure luminous flux.

Luminous flux represents the total amount of visible light emitted by a light source in all measured directions. The CIE defines luminous flux as radiant power evaluated according to the visual response of the standard photometric observer.

In practical terms, lumens answer the question:

How much visible light does this lamp or fixture produce in total?

For example:

  • A small decorative light may produce 100 lumens.
  • A household LED bulb may produce approximately 800 lumens.
  • A powerful commercial fixture may produce several thousand lumens.
  • An LED strip may be specified as 1,000 lumens per meter.

The higher the lumen output, the greater the total quantity of visible light emitted by the product. However, lumens do not indicate where that light goes.

What Do Lumens Tell You?

Lumens are useful for comparing the overall light output of:

  • LED bulbs
  • LED strip lights
  • Linear fixtures
  • Pendant lights
  • Ceiling lights
  • High-bay lights
  • Floodlights
  • Downlights
  • Decorative fixtures

If two LED bulbs have similar beam distributions and one produces 1,200 lumens while the other produces 800 lumens, the 1,200-lumen bulb normally provides more total visible light.

However, this comparison becomes less direct when the products have different beam angles, lenses, reflectors, diffusers, or installation methods.

What Lumens Do Not Tell You

Lumens alone do not tell you:

  • How narrow or wide the beam is
  • How far the light will travel
  • How bright the center of the beam will be
  • How many lux will reach a desk or floor
  • Whether the light is concentrated in one direction
  • How evenly the light will be distributed
  • How much light will be lost through a diffuser
  • Whether the light will create glare
  • Whether the color quality is suitable

A 1,000-lumen spotlight and a 1,000-lumen floodlight produce similar total luminous flux, but they can create dramatically different lighting effects.

The spotlight concentrates the light into a narrow area. The floodlight distributes it across a much larger area.

What Is Candela?

A candela, abbreviated as cd, is the SI unit of luminous intensity.

Luminous intensity describes the amount of luminous flux emitted in a particular direction per unit of solid angle. One candela is equivalent to one lumen per steradian:

1 cd = 1 lm/sr

The candela is one of the seven SI base units. Its modern definition is linked to the luminous efficacy of monochromatic radiation at a specified frequency.

In practical lighting language, candela answers the question:

How strongly is the light projected in a particular direction?

What Is a Steradian?

A steradian is the three-dimensional equivalent of an angle.

A normal angle measured in degrees describes a two-dimensional opening. A solid angle measured in steradians describes how large a cone-shaped section appears from the center of a sphere.

Because candela is lumens per steradian, a light source can create a higher candela value by concentrating its lumens into a smaller solid angle.

This is why lenses and reflectors can increase the beam intensity without increasing the total lumen output of the LED.

Where Is Candela Commonly Used?

Candela is especially useful for products that need to project light in a controlled direction, including:

  • Spotlights
  • Flashlights
  • Searchlights
  • Vehicle headlights
  • Bicycle lights
  • Stage lighting
  • Projection lighting
  • Signal lights
  • Aviation lights
  • Marine navigation lights
  • Landscape spotlights
  • Long-distance architectural lighting

For these applications, the direction and concentration of light may be more important than the total lumen output.

Peak Candela

Lighting manufacturers may provide a specification called peak candela.

Peak candela represents the highest luminous intensity found in the beam, usually near its center. It does not describe the average intensity across the entire beam.

A product with high peak candela can create a strong center beam but may have a relatively small illuminated area.

When comparing peak-candela values, check whether the products have similar:

  • Beam angles
  • Measurement methods
  • Optical systems
  • LED types
  • Distances
  • Beam definitions

What Candela Does Not Tell You

Candela does not tell you the total amount of light emitted by the fixture.

A narrow-beam light can have high candela but relatively low lumens. A wide floodlight can have high lumens but lower candela in any individual direction.

Candela also does not directly tell you the lux level unless you know the distance and angle between the source and illuminated surface.

What Is Lux?

A lux, abbreviated as lx, is the unit of illuminance.

Illuminance measures the quantity of visible light arriving at a surface. One lux equals one lumen uniformly distributed across one square meter:

1 lx = 1 lm/m²

The CIE defines one lux as the illuminance created when one lumen is uniformly distributed over an area of one square meter.

Lux answers the question:

How much light reaches this desk, floor, wall, product, pathway, or working surface?

Examples of Surfaces Where Lux Is Measured

Lux can be measured on:

  • Office desks
  • Kitchen counters
  • Factory workbenches
  • Warehouse floors
  • Retail displays
  • Museum exhibits
  • Sports fields
  • Roads
  • Parking areas
  • Staircases
  • Walls
  • Building façades
  • Film sets
  • Photography subjects

A lux reading is always associated with a location or surface.

Saying that a lamp “produces 500 lux” is incomplete unless the manufacturer also provides the measurement distance, beam position, and test conditions.

Lux Changes With Area

Suppose 1,000 lumens are distributed perfectly and uniformly:

  • Across 1 square meter: 1,000 lux
  • Across 2 square meters: 500 lux
  • Across 5 square meters: 200 lux
  • Across 10 square meters: 100 lux

The total lumen output has not changed. Only the area over which the light is distributed has changed.

In real installations, not every lumen reaches the target surface. Some light may:

  • Travel in another direction
  • Be absorbed by dark materials
  • Be blocked by objects
  • Be lost in a diffuser
  • Reflect onto another surface
  • Remain outside the target area

Therefore, real lux levels are normally lower than a simple lumens-divided-by-area calculation suggests.

The Main Difference Between Lumens, Candela and Lux

The relationship can be understood as a sequence:

  1. A light source generates lumens.
  2. The fixture directs some of those lumens into particular directions, creating candela.
  3. The light travels through space and reaches a surface, producing lux.

Another way to describe it is:

  • Lumens: quantity
  • Candela: directional concentration
  • Lux: surface illumination

A Water Analogy

Imagine a water pump connected to a hose:

  • Lumens are like the total amount of water flowing from the pump.
  • Candela is like the strength of the water stream in a particular direction.
  • Lux is like the amount of water landing on a particular area.

A narrow nozzle creates a powerful water jet. A wide nozzle spreads the same water over a larger area.

Similarly, a narrow-beam lens can create high candela and high center-beam lux from a limited number of lumens. A wide diffuser spreads the light more evenly but reduces the intensity at any individual point.

Candela, Lux and Lumens Formulas

Luminous Flux and Luminous Intensity

The relationship between lumens and candela is:

Luminous flux = luminous intensity × solid angle

Or:

Lumens = candela × steradians

Written as a formula:

Φ = I × Ω

Where:

  • Φ is luminous flux in lumens
  • I is luminous intensity in candela
  • Ω is the solid angle in steradians

Therefore:

Candela = lumens ÷ steradians

This calculation works when the luminous intensity is treated as uniform throughout the specified solid angle.

Real light fixtures often have non-uniform beam distributions, so accurate calculations should use a photometric distribution file or measured intensity data.

Calculating the Solid Angle of a Beam

For a symmetrical cone-shaped beam:

Ω = 2π × [1 − cos(θ/2)]

Where:

  • Ω is the solid angle in steradians
  • θ is the full beam angle

For example, a light with a 60-degree beam angle has a half-angle of 30 degrees:

Ω = 2π × [1 − cos(30°)]

Ω ≈ 0.842 sr

If the fixture distributes 1,000 lumens uniformly through that beam:

Candela = 1,000 ÷ 0.842

Candela ≈ 1,188 cd

This is an idealized calculation. Real LED optics typically have stronger intensity near the center and lower intensity near the edge.

Converting Lumens to Lux

For perfectly uniform illumination:

Lux = lumens ÷ illuminated area

Or:

E = Φ ÷ A

Where:

  • E is illuminance in lux
  • Φ is luminous flux reaching the surface
  • A is the illuminated area in square meters

Example:

A surface receives 2,000 lumens across 5 square meters:

2,000 ÷ 5 = 400 lux

This calculation requires the lumens to be uniformly distributed across the entire area.

Converting Candela to Lux

For a point source aimed perpendicular to a surface:

Lux = candela ÷ distance²

Or:

E = I ÷ d²

Where:

  • E is illuminance in lux
  • I is luminous intensity in candela
  • d is the distance in meters

Example:

A spotlight has a center-beam intensity of 4,000 candela and is positioned 5 meters from a surface:

4,000 ÷ 5² = 160 lux

At the center of the beam, the ideal illuminance is approximately 160 lux.

Candela-to-Lux Formula at an Angle

When the light does not strike the surface perpendicularly:

E = I × cos(α) ÷ d²

Where:

  • E is illuminance in lux
  • I is luminous intensity in candela
  • α is the angle between the incoming light and the surface normal
  • d is the distance from the source

As the light strikes the surface at a more oblique angle, the same beam spreads across a larger projected area, reducing the illuminance.

Why Distance Has Such a Large Effect on Lux

For an ideal point source, illuminance follows the inverse-square law.

This means lux is inversely proportional to the square of the distance:

E ∝ 1/d²

If the distance doubles, the illuminance becomes approximately one-quarter.

If the distance triples, the illuminance becomes approximately one-ninth.

Example of the Inverse-Square Law

Consider a light with an intensity of 4,000 candela:

DistanceCalculationCenter Illuminance
1 meter4,000 ÷ 1²4,000 lux
2 meters4,000 ÷ 2²1,000 lux
3 meters4,000 ÷ 3²444 lux
4 meters4,000 ÷ 4²250 lux
5 meters4,000 ÷ 5²160 lux
10 meters4,000 ÷ 10²40 lux

The source still produces the same lumens and candela. The lux decreases because the beam covers a larger area as the distance increases.

The inverse-square approximation is most reliable when:

  • The source is small compared with the measurement distance.
  • The measurement is taken in the far field.
  • The beam is not significantly modified by nearby surfaces.
  • The light is aimed directly at the measurement surface.

It may not accurately represent measurements extremely close to a long LED strip, large panel, linear fixture, or other extended light source.

How Beam Angle Affects Candela and Lux

Beam angle is one of the most important factors connecting lumens, candela, and lux.

A narrow beam concentrates light into a smaller area. A wide beam distributes light across a larger area.

Consider three idealized fixtures, each producing 1,000 lumens:

Beam AngleApproximate Solid AngleApproximate Average Intensity
20°0.095 sr10,472 cd
60°0.842 sr1,188 cd
120°3.142 sr318 cd

The 20-degree spotlight produces much higher directional intensity than the 120-degree floodlight, despite both producing 1,000 lumens.

At a distance of two meters, their idealized on-axis illuminance would be:

Beam AngleApproximate CandelaCenter Lux at 2 m
20°10,472 cd2,618 lux
60°1,188 cd297 lux
120°318 cd80 lux

These calculations assume uniform output inside each beam. Actual center-beam intensity can differ substantially because real beam distributions are not perfectly uniform.

Narrow-Beam Lighting

Narrow-beam lighting is suitable when you need:

  • Long projection distance
  • Strong accent lighting
  • A small illuminated area
  • Architectural highlighting
  • Stage spotlighting
  • Landscape spotlighting
  • A concentrated flashlight beam

Wide-Beam Lighting

Wide-beam lighting is suitable when you need:

  • General room illumination
  • Even wall washing
  • Broad floor coverage
  • Soft ambient lighting
  • Short-distance task lighting
  • Reduced contrast between illuminated areas

Neither beam type is automatically better. The correct choice depends on the application.

Lumens vs Candela

Lumens and candela both describe light emitted by a source, but they describe different characteristics.

Lumens Measure Total Output

Lumens include visible light emitted across all measured directions.

A fixture can produce high lumens but distribute them broadly. This is common with:

  • LED panels
  • Linear lights
  • LED strips
  • High-bay fixtures
  • Wide-angle floodlights
  • Bare LED bulbs

Candela Measures Directional Output

Candela considers only the intensity in a specified direction.

High candela is common in:

  • Narrow spotlights
  • Flashlights with focused reflectors
  • Vehicle high beams
  • Searchlights
  • Projection fixtures
  • Signaling lights

Can Two Lights Have the Same Lumens but Different Candela?

Yes.

Suppose two lights both produce 1,200 lumens:

  • Light A has a 120-degree beam.
  • Light B has a 30-degree beam.

Using an idealized uniform-beam calculation:

Light A: 120-Degree Floodlight

Solid angle:

Ω ≈ 3.142 sr

Intensity:

1,200 ÷ 3.142 ≈ 382 cd

Light B: 30-Degree Spotlight

Solid angle:

Ω ≈ 0.214 sr

Intensity:

1,200 ÷ 0.214 ≈ 5,607 cd

The narrow spotlight produces approximately 14.7 times more average intensity inside its beam, even though both fixtures produce the same total lumens.

Lumens vs Lux

Lumens describe the light leaving the source. Lux describes the light arriving at a surface.

Why You Cannot Directly Convert Lumens to Lux

A direct conversion requires additional information, including:

  • Illuminated area
  • Beam angle
  • Distance
  • Fixture efficiency
  • Optical losses
  • Installation position
  • Surface angle
  • Reflection conditions
  • Light distribution pattern

The basic relationship is:

Lux = lumens reaching the surface ÷ surface area

The phrase “reaching the surface” is important. Not all lumens produced by a fixture reach the target area.

Example

A fixture produces 3,000 lumens.

If all 3,000 lumens reached a 10-square-meter floor evenly:

3,000 ÷ 10 = 300 lux

But if only 60% of the light reaches the target floor:

3,000 × 0.60 = 1,800 lumens

1,800 ÷ 10 = 180 lux

The actual illuminance would be closer to 180 lux before considering additional depreciation or dirt-related losses.

Candela vs Lux

Candela describes the intensity leaving the source in a direction. Lux describes the illuminance arriving at a surface.

The relationship depends primarily on distance and the angle of incidence.

For a perpendicular surface:

Lux = candela ÷ distance²

Example

A light has a peak intensity of 10,000 candela.

At 5 meters:

10,000 ÷ 25 = 400 lux

At 10 meters:

10,000 ÷ 100 = 100 lux

The candela remains unchanged, but the measured lux decreases as the light travels farther.

Why Lux Without a Distance Is Misleading

A product description that says “this lamp produces 1,000 lux” is incomplete.

The statement should include information such as:

  • 1,000 lux at one meter
  • Center-beam illuminance
  • Measurement taken perpendicular to the source
  • Test performed without a diffuser
  • Illuminated area at the measurement distance

Lux values should not be compared unless the measurement conditions are similar.

What Is Luminance?

Luminance is frequently confused with illuminance.

Illuminance, measured in lux, describes light arriving at a surface.

Luminance, measured in candela per square meter, describes the directional light emitted or reflected by a visible surface.

Luminance is commonly used for:

  • Computer monitors
  • Televisions
  • Smartphone displays
  • Digital signs
  • Lightboxes
  • Illuminated advertising
  • Road surfaces
  • Architectural façades
  • LED display panels

NIST describes candela per square meter as the unit commonly used for luminance.

Are Nits the Same as Candela per Square Meter?

Yes.

In display specifications:

1 nit = 1 cd/m²

A display rated at 1,000 nits has a rated luminance of 1,000 candela per square meter under the specified test conditions.

Lux and nits are not interchangeable:

  • Lux describes incoming light.
  • Nits describe directional light leaving a visible surface.

Watts vs Lumens

Watts measure electrical power, not visible light output.

In traditional lighting, consumers often associated higher wattage with greater brightness because similar incandescent lamps had relatively predictable efficiencies.

With modern LED technology, two products using the same wattage can produce different lumen outputs.

The relevant relationship is luminous efficacy:

Luminous efficacy = lumens ÷ watts

The unit is:

lm/W

Example

LED Light A:

  • Power: 10 W
  • Output: 1,000 lm
  • Efficacy: 100 lm/W

LED Light B:

  • Power: 10 W
  • Output: 1,400 lm
  • Efficacy: 140 lm/W

Both consume 10 watts, but Light B produces more visible light.

However, higher efficacy does not automatically guarantee better lighting quality. You should also evaluate:

  • Color rendering index
  • Color temperature
  • Color consistency
  • Flicker performance
  • Beam quality
  • Heat management
  • Lifetime
  • Dimming compatibility
  • Driver quality

Foot-Candles vs Lux

A foot-candle is a non-SI unit of illuminance commonly used in some markets.

One foot-candle represents one lumen distributed over one square foot.

The conversion is:

1 foot-candle = approximately 10.764 lux

1 lux = approximately 0.0929 foot-candles

The CIE lists the relationship between foot-candles and lux in its lighting vocabulary.

Conversion Examples

Foot-CandlesLux
1 fc10.764 lx
5 fc53.82 lx
10 fc107.64 lx
20 fc215.28 lx
30 fc322.92 lx
50 fc538.20 lx
100 fc1,076.40 lx

To convert foot-candles to lux:

Lux = foot-candles × 10.764

To convert lux to foot-candles:

Foot-candles = lux ÷ 10.764

Which Measurement Should You Use?

Use Lumens When Comparing Total Light Output

Check lumens when selecting:

  • Household bulbs
  • LED strip lights
  • Ceiling fixtures
  • Pendant lights
  • LED panels
  • Linear fixtures
  • General lighting products

For LED strips, the most useful specification is normally lumens per meter or lumens per foot.

Use Candela When Beam Strength Matters

Check candela when selecting:

  • Spotlights
  • Flashlights
  • Searchlights
  • Vehicle headlights
  • Long-distance projectors
  • Stage lights
  • Landscape spotlights
  • Signaling products

Candela is especially important when the light must reach a distant target.

Use Lux When Designing Illumination for a Surface

Check or calculate lux when planning:

  • Office lighting
  • Kitchen task lighting
  • Warehouse lighting
  • Factory workstations
  • Retail displays
  • Museum cases
  • Stair lighting
  • Road lighting
  • Sports lighting
  • Photography lighting

Lux is the most relevant unit when the final question is:

“Will this surface receive enough light?”

How Lumens, Candela and Lux Apply to LED Strip Lights

LED strip lighting is usually specified in lumens per meter rather than candela.

This is because LED strips are extended linear sources and are often used for:

  • Cove lighting
  • Under-cabinet lighting
  • Shelf lighting
  • Display-case lighting
  • Wall washing
  • Ceiling lighting
  • Stair lighting
  • Signage
  • Decorative lighting
  • Architectural outlines

However, lumen output alone cannot determine the final lighting result.

Important LED Strip Specifications

When comparing LED strips, evaluate:

1. Lumens per Meter

This indicates the visible light output produced by each meter of strip.

For example:

  • 500 lm/m
  • 1,000 lm/m
  • 1,500 lm/m
  • 2,000 lm/m

The required output depends on whether the strip is being used for decoration, ambient lighting, or functional task lighting.

2. Beam Distribution

A bare surface-mounted LED strip typically emits light across a broad forward distribution.

The final distribution changes when the strip is installed inside:

  • A deep aluminum profile
  • A shallow profile
  • A corner profile
  • A narrow lens
  • A frosted diffuser
  • A clear cover
  • A silicone neon tube

3. Distance From the Surface

An LED strip installed 5 centimeters above a shelf can create much higher local lux than the same strip installed 50 centimeters away.

The closer installation may also create visible hot spots unless the LED density, diffuser depth, and optical design are carefully selected.

4. Diffuser Transmission

A diffuser improves uniformity and reduces visible LED dots, but it also absorbs or redirects part of the light.

The actual loss depends on:

  • Diffuser material
  • Opacity
  • Thickness
  • Profile depth
  • Beam distribution
  • LED-to-diffuser distance

Do not assume that the bare-strip lumen output will be identical to the output of the completed profile system.

5. Surface Reflectance

A white wall reflects more visible light than a dark wall.

The same LED strip installation can appear significantly different when used with:

  • White paint
  • Black paint
  • Wood
  • Polished metal
  • Matte stone
  • Glass
  • Glossy tiles

6. LED Density

Higher LED density can improve visual uniformity, especially when the strip is placed close to a diffuser.

However, LED density alone does not determine total light output. The LED package, drive current, thermal design, PCB construction, and electrical efficiency also matter.

7. Color Temperature

Warm white, neutral white, and cool white light can feel different even at similar measured lux levels.

Color temperature should be chosen according to:

  • Interior materials
  • Desired atmosphere
  • Task requirements
  • Time of use
  • Product presentation
  • Existing lighting

8. Color Rendering

CRI describes how accurately a light source renders object colors compared with a reference illuminant.

For retail displays, artwork, food presentation, cosmetics, photography, and high-quality interiors, color rendering may be as important as lumen output.

How to Estimate the Required Lumens for a Space

A simplified calculation is:

Required lumens reaching the surface = target lux × area

For a more realistic fixture calculation:

Required fixture lumens = target lux × area ÷ utilization factor ÷ maintenance factor

Where:

  • Target lux is the desired illuminance.
  • Area is measured in square meters.
  • Utilization factor estimates how much fixture output reaches the working area.
  • Maintenance factor accounts for depreciation, dirt, aging, and other losses.

Example Calculation

Suppose a designer wants an illustrative target of 500 lux across a two-square-meter countertop.

Assume:

  • Target illuminance: 500 lx
  • Area: 2 m²
  • Utilization factor: 0.60
  • Maintenance factor: 0.80

Calculation:

Required lumens = 500 × 2 ÷ 0.60 ÷ 0.80

Required lumens ≈ 2,083 lm

If two meters of LED strip are used:

2,083 ÷ 2 ≈ 1,042 lm/m

A strip producing approximately 1,050 lumens per meter would be a reasonable starting point under these assumptions.

This is only a preliminary estimate. The final result should be confirmed with:

  • Photometric data
  • Installation geometry
  • Surface reflectance
  • Profile and diffuser losses
  • On-site lux measurements
  • A lighting simulation when necessary

How to Measure Lux Correctly

Lux is commonly measured with a lux meter.

For meaningful results, the sensor should be positioned on the actual working plane.

Examples include:

  • On the desk surface for office lighting
  • On the kitchen counter for task lighting
  • On the floor for circulation lighting
  • On the displayed product for retail lighting
  • On the machine work area for industrial lighting

Lux Measurement Tips

Position the Sensor Correctly

Place the sensor at the location and orientation of the surface being evaluated.

Tilting the sensor can change the reading because light arriving at an angle is distributed across a larger projected area.

Avoid Blocking the Light

The person taking the measurement should not cast a shadow over the sensor.

Allow the Lighting to Stabilize

Some lighting systems may need a short stabilization period before measurements are recorded.

Measure Multiple Points

A single center reading does not describe the entire installation.

Measure:

  • Maximum illuminance
  • Minimum illuminance
  • Average illuminance
  • Uniformity across the area

Record the Test Conditions

Document:

  • Fixture model
  • Dimming level
  • Measurement height
  • Distance from the light
  • Sensor orientation
  • Room condition
  • Daylight contribution
  • Surface materials
  • Date of measurement

Control Daylight When Necessary

Daylight can change quickly and may significantly affect the reading.

For testing electric lighting alone, measurements should be taken under controlled conditions.

Common Mistakes When Comparing Candela, Lux and Lumens

Mistake 1: Using Watts as a Measure of Brightness

Watts measure electrical consumption, not visible light output.

Compare lumens and efficacy instead.

Mistake 2: Assuming More Lumens Always Means a Brighter Beam

A high-lumen floodlight may have lower beam intensity than a lower-lumen spotlight.

Check beam angle and candela.

Mistake 3: Comparing Lux Values Measured at Different Distances

A lux value measured at 0.5 meter cannot be directly compared with a value measured at two meters.

Always check the measurement distance.

Mistake 4: Ignoring Beam Angle

Two fixtures with identical lumens can create very different lux levels because of their beam angles.

Mistake 5: Treating Candela as Total Light Output

Candela describes intensity in a direction, not total luminous flux.

Mistake 6: Treating Lux as a Fixed Fixture Specification

Lux depends on the fixture and the installation environment.

Changing the distance, angle, surface, diffuser, or mounting position changes the result.

Mistake 7: Ignoring Optical Losses

Diffusers, lenses, reflectors, silicone covers, waterproof coatings, and aluminum profiles can affect delivered light.

Mistake 8: Comparing Only the Highest Lux Reading

A high center reading does not guarantee good uniformity.

A successful installation usually requires an appropriate balance of:

  • Average illuminance
  • Minimum illuminance
  • Maximum illuminance
  • Uniformity
  • Glare control

Mistake 9: Ignoring Color Quality

Two lights can produce the same lumens and lux while rendering colors differently.

Check CRI, color temperature, color consistency, and spectral quality.

Mistake 10: Using Ideal Formulas as Final Design Results

Simple equations are useful for preliminary estimates.

Complex commercial, architectural, museum, industrial, and outdoor projects should use photometric files, lighting simulation software, and on-site measurements.

Practical Buying Guide

Buying an LED Bulb

Check:

  • Lumens
  • Watts
  • Luminous efficacy
  • Color temperature
  • CRI
  • Beam angle
  • Base type
  • Dimming compatibility

Lumens are normally the primary output measurement.

Buying an LED Strip

Check:

  • Lumens per meter
  • Watts per meter
  • Voltage
  • LED density
  • PCB width
  • Cut length
  • CRI
  • Color temperature
  • IP rating
  • Maximum run length
  • Voltage drop
  • Profile and diffuser compatibility

For task lighting, request measured lux data or test a sample in the intended installation.

Buying a Spotlight

Check:

  • Lumens
  • Beam angle
  • Peak candela
  • Center-beam lux at a stated distance
  • Field angle
  • Optical quality
  • Glare control

Candela and beam angle may be more useful than lumens alone.

Buying a Flashlight

Check:

  • Total lumens
  • Peak beam intensity in candela
  • Beam distance
  • Beam profile
  • Runtime
  • Battery performance
  • Thermal regulation

High lumens provide total output. High candela provides greater beam concentration and potential throw distance.

Buying a Floodlight

Check:

  • Lumens
  • Beam distribution
  • Mounting height
  • Target area
  • Lux distribution
  • Glare
  • IP and impact protection
  • Photometric files

A floodlight should be selected according to the required illumination across the entire target area, not only its center-beam value.

Frequently Asked Questions

1. What is the difference between lumens, lux and candela?

Lumens measure total visible light output. Candela measures luminous intensity in a particular direction. Lux measures how much visible light reaches a surface.

2. Is lux brighter than lumens?

Lux and lumens do not describe the same quantity, so one cannot be described as brighter than the other. Lumens describe total output, while lux describes surface illuminance.

3. How many lux is one lumen?

One lumen produces one lux when it is distributed uniformly across one square meter:

1 lx = 1 lm/m²

4. How many lumens are in one candela?

One candela equals one lumen per steradian:

1 cd = 1 lm/sr

The total lumens associated with a candela value depend on the solid angle over which the light is emitted.

5. Can lumens be converted directly to candela?

Only when the beam’s solid angle or complete intensity distribution is known.

For a uniform beam:

Candela = lumens ÷ steradians

6. Can lumens be converted directly to lux?

Only when you know how many lumens reach the surface and the illuminated area.

Lux = lumens reaching the surface ÷ area

7. Can candela be converted to lux?

Yes, when the distance and angle are known.

For a point source aimed perpendicular to a surface:

Lux = candela ÷ distance²

8. Why does lux decrease with distance?

As light travels farther, it spreads across a larger area. For an ideal point source, illuminance decreases approximately according to the inverse-square law.

9. Does lumen output decrease with distance?

The source’s rated lumen output does not decrease simply because the observer or surface moves farther away. However, fewer lumens may fall within a particular target area as the light spreads.

10. Does candela decrease with distance?

Candela is a property of the source’s directional intensity and does not decrease merely because the measurement surface is moved farther away. The lux measured at the surface decreases with distance.

11. Is higher candela always better?

No. Higher candela is useful for long-distance or concentrated lighting, but it may create a beam that is too narrow for general illumination.

12. Is higher lumen output always better?

No. Excessive output can waste energy, create glare, reduce comfort, and produce uneven illumination. The output should suit the application.

13. Why can a flashlight with fewer lumens shine farther?

It may have a reflector or lens that concentrates the available lumens into a narrower beam, increasing peak candela.

14. Why do two lights with the same lumens look different?

They may have different beam angles, optical systems, color temperatures, spectral distributions, diffuser losses, surface luminance, or installation conditions.

15. What unit should I check for room lighting?

Use lumens to compare fixture output and lux to evaluate the light reaching the room’s working surfaces.

16. What unit should I check for a spotlight?

Check lumens, beam angle, and candela. Candela is particularly useful for evaluating directional intensity.

17. What unit should I check for an LED strip?

Check lumens per meter, watts per meter, LED density, color quality, voltage, and installation conditions. Measure lux at the target surface for functional applications.

18. What is peak beam intensity?

Peak beam intensity is the highest candela value within a beam, normally near the optical center.

19. What is center-beam lux?

Center-beam lux is the illuminance measured or calculated at the center of the beam at a specified distance.

20. Is lux the same as brightness?

Not exactly. Lux is an objective measurement of illuminance on a surface. Brightness is commonly used as a subjective description of visual perception.

21. Is a nit the same as lux?

No. A nit is one candela per square meter and measures luminance. Lux measures illuminance arriving at a surface.

22. Are foot-candles the same as candela?

No. A foot-candle measures illuminance, while candela measures luminous intensity.

1 foot-candle ≈ 10.764 lux

23. Can a phone accurately measure lux?

A phone app may provide a rough comparison, but accuracy depends on the device sensor, calibration, spectral response, diffuser design, and software. A calibrated lux meter is better for professional measurements.

24. Does color temperature affect lumens?

Color temperature itself does not define lumen output. However, LED configurations with different color temperatures can have different efficiencies and lumen ratings.

25. Does a diffuser reduce lumens?

A diffuser normally absorbs, reflects, or redirects part of the light. It can reduce measured output while improving uniformity and visual comfort.

26. Does waterproof silicone reduce LED strip output?

A waterproof coating or silicone extrusion may reduce or redistribute light depending on its transparency, thickness, geometry, and material.

27. Why should LED strip brightness be specified in lumens per meter?

An LED strip is a linear light source. Lumens per meter make it easier to estimate the total output for different installation lengths.

28. How do I calculate total LED strip lumens?

Multiply the strip’s rated lumens per meter by its installed length:

Total lumens = lumens per meter × number of meters

For example:

1,200 lm/m × 5 m = 6,000 lm

29. Will a five-meter LED strip produce exactly five times the light of one meter?

The theoretical rated total may be five times greater, but actual performance can be affected by voltage drop, power injection, thermal conditions, controllers, connectors, and driver capacity.

30. What information is needed for an accurate lighting design?

An accurate design may require:

  • Target illuminance
  • Room dimensions
  • Mounting height
  • Surface reflectance
  • Fixture photometric data
  • Beam distribution
  • Maintenance factor
  • Utilization factor
  • Glare requirements
  • Control strategy
  • Daylight conditions

Conclusion

Candela, lux, and lumens are connected, but each unit answers a different lighting question.

  • Lumens tell you how much visible light a source produces in total.
  • Candela tells you how strongly the light is projected in a particular direction.
  • Lux tells you how much light reaches a specific surface.

When comparing general lighting products, begin with lumens. When evaluating spotlights, flashlights, headlights, or long-distance projection, examine candela and beam angle. When designing a room, desk, counter, display, floor, or work area, calculate or measure lux.

For LED strip lighting, do not select a product based only on wattage or LED quantity. Compare lumens per meter, optical distribution, installation distance, color quality, voltage drop, diffuser transmission, heat management, and the final lux level on the illuminated surface.

A successful lighting system is not simply the one with the highest number. It is the system that delivers the correct amount of high-quality light to the right place, with suitable uniformity, efficiency, comfort, and control.

maisie
maisie
Maisie

Hi, I’m the author of this post, and I have been in this field for more than 10 years. If you want to wholesale LED Strip Lights or custom LED Pixel Light, feel free to ask me any questions.

Table of Contents

Request A Quote

Need something tailored in a short time? We’ve got a plan for you.